Version: 2.4a
Date : 2007/04/23

Change features:

Fixed bugs:
1. Fixed SNMP does not display correct counter issue.

*****************************************************************************
Version: 2.4
Date : 2007/04/18

Change features:
1. Disable DHCP mode by factory default.

Fixed bugs:
1. RSTP web page timer issue.
2. Cable diagnostics pair swapping issue, reverse the result for pair A&B and pair C&D 
to fit SMC's HW.
3. SFP does not link up with SMC's specific SFP module when power up. 
4. VLAN ID 4094 can not be configured issue. 
5. SIP =0 filter issue. TCP/UDP packets with source/dest port equals to zero will be 
forwarded correctly/transparently.

*****************************************************************************
Version: 2.3
Date : 2006/11/28

New features:
none.

Change features:
none.

Fixed bugs:
1. SMC8024L2-17-00021: 1QVLAN:port can't transmit tagged packets correctly.
   SMC8024L2-17-00012 1QVLAN: the frame which sent from access mode port is tagged.
   SMC8024L2-17-00025 1Qvlan:Packets which receive from untagged Port are tagged.
   SMC8024L2-FLF-17-00031: 1Qvlan:Packets which receive from untagged Port are tagged.
   SMC8024L2-FLF-17-00032 VLAN:DUT can't handle ping packets with tag

2. SMC8024L2-17-00036 Realworld:RSTP is not work and Ping DUT will lose some packets.

3. SMC8024L2-FLF-17-00002: IGMPsnooping:When disable Unregistered IPMC Flooding,the mrouter port can't receive the multicast packets .

4. SMC8024L2-17-00037: RSTP: DUT don't obey "(HelloTime+1)*2MaxAge(ForwardingDelay-1)*2" Bug.

5. SMC8024L2-17-00038 1Qvlan: In WEB menu "Status"-"Overview"-"vlan information", it just can display 8 vlans.
   SMC8024L2-FLF-17-00039: 1Qvlan: In WEB menu "Status"-"Overview"-"vlan information", it just can display 8 vlans.

6. SMC8024L2-FLF-17-00019: L2SWPer:The DUT don't support the Jumbo Frame.

7. SMC8024L2-FLF-17-00029: 1QVLAN:can be set Port's PVID as a inexistence Vlan ID.When we set Port's PVID by using inexistence VLAN ID the PVID will be 1.

8. Cable Diagnostics issue in 16 port.

9. SMC8024L2-FLF-17-00033: ConfigurationFile:when upload a error config file, DUT will show "Can't find Page".

10. SMC8024L2-FLF-17-00040: 1QVLAN:In WEB Help, DUT displays "the range of vlan id is 1~4094".

11. SMC8024L2-FLF-17-00018 SNMP: MIB can not work correctly.

12. SMC8024L2-FLF-17-00033 RSTP:When enable trunk and rstp,DUT can't transmit normal port status.
    SMC8024L2-FLF-17-00034 Realworld:RSTP is not work and Ping DUT will lose some packets.

13. Fix for no dhcp changes on link up state and problem with DHCPRELEASE not being transmitted,
    and now also transmitted with previous DHCP IP Address.

14. Fixed IPMC mac entry delete issue in 7389/90/91 revC chip.

*****************************************************************************

Version: 2.2
Date : 2006/10/20

New features:
none.

Change features:
none.

Fixed bugs:
1. Port bandwidth (rate limit) can not be saved in SMC8016.
2. A minor bug in port mirroring function.
3. LACP + RSTP Hang/Reboot issue.
4. Trunk group can not be configured in VLAN port config web page issue in SMC8016.
5. Thin PC can't get Boot file name.
6. Port rate limiting will overlay the rate limiting configs of trunk issue.
7. LACP and static trunk should be exclusive.
8. Non-vlan port automatically assigned to management vlan 1.

*****************************************************************************

Version: 2.1
Date : 2006/9/28

New features:
none.

Change features:
none.

Fixed bugs:
1. Change the H/W version string size back to the same size with release 1.9.

*****************************************************************************

Version: 2.0
Date : 2006/9/27

New features:
1. Added SMC8016 16 port platform support.

Change features:
none.

Fixed bugs:
1. SMC8024L2-17-00031 : System : when enable RSTP in four DUTs,the Web Manager will show "Duplicated PC is controlling the device now  

2. SMC8024L2-17-00029 : System : DUT1 can creat max 255 vlan but only learn 20 mac-address. 

3. SMC8024L2-17-00027 : System : Reset DUT and restore default setting, DUT hang.  

*****************************************************************************

Version: 1.9
Date : 2006/7/7

New features:
none.

Change features:
none.

Fixed bugs:
1. SMC8024L2-17-00014 : RSTP: when change Root Bridge's priority, it can't become Designated Bridge.
                       Fixed in this release.
2. SMC8024L2-17-00019 : SNMP:MIB can not work correctly, We can't set value for read-write variable by private community.
                       No this issue here. Can't reproduce it.
4. SMC8024L2-17-00022     : System:After configured LACP and RSTP and connected two DUTs, the DUTs would auto-reboot and be hang.
   SMC8024L2-FLF-17-00022
                           Limit the trunk members from 8 to 5 members.
6. SMC8024L2-17-00012 : 1QVLAN: the frame which sent from access mode port is tagged	In the access mode the switch behavior is forwarding the packets as untaged packets.
                       It means that the switch doing packet forwarding without doing any change in the packets.
                       If the packet is tagged in the ingress, it will still be tagged in the egress.
                       It is waht can be expected.
7. SMC8024L2-17-00015 : RSTP: when port's Port Role is "Alternated" or "Backup", its Port State is "Blocked", but it should be "Discarding"
                       As what can be expected. The following web link is the RSTP test plan from IXIA.
                       http://www.ixiacom.com/library/test_plans/display?skey=stp-rstp#3.
8. SMC8024L2-17-00006     : after connect a short cable with the DUT,when I press "apply" button frequently, the cable status display wrong.
   SMC8024L2-FLF-17-00020   Fixed in this release.
   SMC8024L2-FLF-17-00028
   SMC8024L2-FLF-17-00020
   SMC8024L2-FLF-17-00007
9. SMC8024L2-17-00013 : RSTP:when set invaild value from WEB, you must click another page before you wanna correct in this page.
                       We have "refresh" button.
10. SMC8024L2-17-00016 : PortSecurity:when I enable Port Security function in any port,the port can not learn new MAC address.
                        As what can be expected.
11. SMC8024L2-17-00020 : 802.1x:The DUT can't sent radius access request to the radius server.
                        Fixed. Should be same as  SMC8024L2-17-00005 which is fixed.
12. SMC8024L2-17-00011 : when unplug the Ethereal cable, DUT will send "DHCP request" and Manual ip will be down.
                        Suould be closed.	
13. SMC8024L2-17-00023     : System:After connected DUTs and only configure the RSTP, the RSTP status WEB page of DUT1 can't be opened.	Needs more time to be fixed and sugget limitation in LACP members pr.
    SMC8024L2-FLF-17-00023   Limit the trunk members from 8 to 5 members.
14. SMC8024L2-17-00024     : System:After connected DUTs and configure the DUTs as diagram showed, the RSTP status WEB page of all DUTs can't be opened.	Needs more time to be fixed and sugget limitation in LACP members pr.
    SMC8024L2-FLF-17-00024   Limit the trunk members from 8 to 5 members.
15. SMC8024L2-FLF-17-00009 : IPConfiguration: we must restart the DUT to take the DHCP effect.
                         	As what can be expected. No fix. Should be closed.
16. SMC8024L2-FLF-17-00024 : PortTrunk:If enable forced mode with 100M/F capability for both ends of trunk connection,the trunk link down.
                            Fixed in this release.	
17. SMC8024L2-FLF-17-00017 : 1QVLAN: can add vlan with invalid vid.
                            Fixed in new release.
18. SMC8024L2-FLF-17-00025 : L2SW:During the testing of traffic load over minimum IFG with Bi-directional(port-pair),there are some packet lost (15/100000).
                            Caused by Excessive collisions. According to Standard. Should be Closed.
19. SMC8024L2-FLF-17-00026 : L2SW:set the duplex to the half mode,the traffic load for mix speed/duplex with line speed will cause some packets to be lost.
                            Caused by Excessive collisions. According to Standard. Should be Closed.
20.SMC8024L2-FLF-17-00027 : IGMPSnooping:Only 13-15 groups can be left after I sent IGMP leave reports to leave 32 groups.	"Made fix in new release. We already add the queue buffer from 8 to 16 in our code


WAD issues:

*****************************************************************************

Version: 1.8
Date : 2006/5/5

New features:
none.

Change features:
none.

Fixed bugs:
1. SMC8024L2-FLF-17-00002 : IGMPsnooping:the DUT can't handle well version 2 membership leave packet.
2. SMC8024L2-FLF-17-00003 : IGMPSnooping:DUT can't handle the igmp leave reports well to remove the registered muliticast from leaving igmp member port.
3. SMC8024L2-FLF-17-00005 : IGMPsnooping:The timeout of Host is only about 70 seconds, it's too short.
4. SMC8024L2-FLF-17-00007 : after connect a short cable with the DUT,when I press "apply" button frequently,the cable status display wrong.
5. SMC8024L2-FLF-17-00013 : WEB:The second help INDEX menu can't connect and display correct web page, it will show failed.
6. SMC8024L2-FLF-17-00011 : 1Q VLAN :VLAN can be removed when it have untagged port members which has the same PVID as this VLAN.
7. SMC8024L2-FLF-17-00014 : RSTP:can't know the status of port role.
8. SMC8024L2-FLF-17-00015 : NetworkNotice: can't recive "Authentication failure" trap.
		-- It is disabled by default. Please go to snmp page to enable  it.							
9. SMC8024L2-FLF-17-00017 : NetworkNotice: can't disable SNMP in web management.
10.SMC8024L2-FLF-17-00018 : SNMP: MIB can not work correctly

WAD issues:
1. SMC8024L2-FLF-17-00001 : PortMirror:When enable port mirror, sending bi-unicast traffic will occur packets loss.
2. SMC8024L2-FLF-17-00004 : L2SWPer:Throughput exists packets lost ,the pass rate is 64.37%  for the jumbo frame of 9216.
3. SMC8024L2-FLF-17-00006 : 802.1x:The DUT can't sent radius access request to the radius server. (not a bug)
4. SMC8024L2-FLF-17-00008 : PortSecurity:when I enable Port Security function in any port,the port can not learn new MAC address. 
5. SMC8024L2-FLF-17-00009 : SNTP:The SNTP can't be configured, this feature can't work. (not supported)
6. SMC8024L2-FLF-17-00012 : NetworkMonitor:can't show historyControlTable in EliteView RMON Manager.(not supported)
7. SMC8024L2-FLF-17-00016 : 1QVLAN: can't join any port to special vlan as tagged set.(not supported)

*****************************************************************************
